Water Science & Technology: Water Supply Vol 7 No 5-6 pp 167–173 © IWA Publishing 2007 doi:10.2166/ws.2007.135
Detailed characterisation of fouling deposition and removal on hollow fibre membrane by direct observation technique
Y. Marselina*, P. Le-Clech*, R. Stuetz* and V. Chen*
*UNESCO Centre for Membrane Science and Technology, School of Chemical Sciences and Engineering, USA
**Centre for Water and Waste Technology, School of Civil and Environmental Engineering University of New South Wales, Sydney, Australia
ABSTRACT
A direct observation method has been used to study fouling deposition and removal during the filtration of solutions modelling MBR foulants. The method enabled in-situ observation tangentially to the surface of hollow fibre membranes, so that cake height during filtration and cleaning could be clearly quantified, and the dynamics of backwashing on foulants during their removal could be observed. Exciting phenomena occurred during fouling removal, the backwashing force and crossflow shear caused cake expansion followed by fluidisation of the fouling layer. While solution turbidity remains a limiting factor in its application, this non-invasive direct observation technique offers significant potential for further MBR studies, such as filtration of activated sludge, and effects of filtration mode and of bubbling.
Keywords: Cake formation; crossflow; fouling; membrane bioreactor; optical microscopy
Full article (PDF Format)
PAY-PER-VIEW: Buy this article for £20.00 (IWA MEMBER PRICE: £15.00)
|
