 |
Journal of Hydroinformatics Vol 08 No 4 pp 271–295 © IWA Publishing 2006 doi:10.2166/hydro.2006.006
Application of an Eulerian–Lagrangian–Agent method (ELAM) to rank alternative designs of a juvenile fish passage facility
L. J. Weber, R. A. Goodwin, S. Li, J. M. Nestler and J. J. Anderson
IIHR Hydroscience & Engineering, College of Engineering, University of Iowa, Iowa City, , IA 52242-1585, , USA Tel:+1 319 335 5597; larry-weber@uiowa.edu
Research Environmental Engineer, Environmental Laboratory, US Army Engineer Research & Development Center, CENWP-EC-HD, 333 SW 1st Ave, PO Box 2946Portland, , OR 97208, , USA Tel:+1 503 808 4872;rag12@cornell.edu
IIHR Hydroscience & Engineering, College of Engineering, University of Iowa, Iowa City, IA 52242-1585, , USA Tel:+1 319 335 6061;songheng-li@uiowa.edu
Environmental Modeling & System-Wide Assessment Center (CEERD-IV-Z), US Army Engineer Research & Development Center, 3909 Halls Ferry RdVicksburg, , MS 39180-6199, , USATel:+1 601 634 2720;john.m.nestler@erdc.usace.army.mil
School of Aquatic & Fishery Sciences, University of Washington, 1325 4th Ave., Suite 1820Seattle, , WA 98101, USA Tel:+1 206 543 4772;jim@cbr.washington.edu
ABSTRACT
The Eulerian–Lagrangian–Agent method (ELAM) couples three modelling approaches into a single, integrated simulation environment: (i) Eulerian descriptions, (ii) Lagrangian formulations, and (iii) agent reference frameworks. ELAMS are particularly effective at decoding and simulating the motion dynamics of individual aquatic organisms, using the output of high fidelity computational fluid dynamics (CFD) models to represent complex flow fields. Here we describe the application of an ELAM to design a juvenile fish passage facility at Wanapum Dam on the Columbia River in the United States. This application is composed of three parts: (1) an agent-based model, that simulates the movement decisions made by individual fish, (2) an Eulerian CFD model that solves the 3D Reynolds-averaged Navier–Stokes (RANS) equations with a standard k–ε turbulence model with wall functions using a multi-block structured mesh, and (3) a Lagrangian particle-tracker used to interpolate information from the Eulerian mesh to point locations needed by the agent model and to track the trajectory of each virtual fish in three dimensions. We discuss aspects of the computational mesh topology and other CFD modeling topics important to this and future applications of the ELAM model for juvenille salmon, the Numerical Fish Surrogate. The good match between forecasted (virtual) and measured (observed) fish passage proportions demonstrates the value-added benefit of using agent-based models (i.e. the Numerical Fish Surrogate model) as part of common engineering practice for fish passage design and, more fundamentally, to simulate complex ecological processes.
Keywords: computational fluid dynamics; computer-based simulation; ecohydraulics; ecological modeling; environmental hydroinformatics; fish modeling; fish passage; individual-based modeling
Full article (PDF Format)
PAY-PER-VIEW: Buy this article for £20.00 (IWA MEMBER PRICE: £15.00)
|
|
|
